Soil Temperature Equipments

Product Details:

With rich industrial experience we are involved in offering an extensive range of 410 Leica Disto Meter.

Product Details:

We offer a wide range of HI9829 GPS Multiparameter Meter.

Features:

• Ammonium, chloride and nitrate ISE’s
• Logging from probe or meter
• Fully customizable instrument, probe, sensors and measurement specifications
• Display from 1 to 12 parameters with font dimension adjustment
• Field replaceable sensors
• pH/ORP or pH, four electrode EC and galvanic DO sensors
• Auto-recognition of all sensors
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Product Details:

The HI 98100 Checker Plus pH Tester provides users with fast and accurate readings from with a resolution of am pH. The Checker. Plus features an easy-to-read LCD and two-point calibration with automatic buffer recognition. The pH electrode of the Checker. Plus can be easily replaced. You only need to unscrew the electrode from the meter body and screw on a new one. The Checker. Plus is fast, accurate and lightweight. With 1000 hours of battery there is no need to worry about frequent battery replacement. 

Product Details:

We offer a wide range of HI 9565 Portable Thermo Hygrometer.

Product Details:

Other Detail:

• The dual-level LCD displays measurement and temperature readings simultaneously
• Automatic Temperature Compensation for accurate measurements
• Easy measurement; place a few drops of the sample in the well and press the Read key
• BEPS (Battery Error Prevention System) alerts the user in the event that low battery power could adversely affect readings.
• IP65 water protection; built to perform under harsh laboratory and field conditions.
• Quick, accurate results, readings are displayed in approximately 1.5 seconds.
• Single point calibration with distilled or deionized water
• Small sample size, can be as small as 2 metric drops.
• Automatic shut-off after three minutes of non-use
• Stainless steel sample well, easy to clean and corrosion resistant
• ABS thermoplastic casin

Product Details:

We offer a wide range of HI 141 Temperature Data Logger.

Product Details:

• 1 or 2 channels with internal or external sensor
• With or without LCD
• 16,000 samples/channel (1-channel models) or 8,000 samples/channel (2-channel models)
• Logging interval from 1 second to 24 hours
• Logging delay start up to 199 hours and magnetic start
• Programmable high and low alarms
• Non-volatile storage of logging
• Waterproof Casing
• BEPS (Battery Error Protection System)

Product Details:

The Hanna Research Grade Conductivity TDS Meter provides clear directions on how to perform each testing stage and automatically monitors the temperature, conductivity and stability during testing and determines whether a sample is within USP limits.

This instrument is equipped with auto standard recognition and can support custom calibration solutions. Up to a four point calibration can be obtained for enhanced accuracy over an extended measuring range.

The enhanced warning system is in place to alert users when measuring outside the calibration range. This system will also remind the user when a new calibration is due.

Features also include real-time graphic displays and on-screen GLP data. On-board contextual help can be accessed from any mode via the HELP button.

Up to 10 profiles can be saved and recalled eliminating the need to reconfigure each time when a different electrode is used.

Three selectable logging modes are available: Automatic, Manual and AutoHold logging. Up to 100 logging lots with 10,000 records per lot can be stored for automatic or manual modes along with up to 200 USP reports.

All features are available in English, Italian, Portuguese and Spanish. Connect to a PC via the USB or RS232 ports with the use of HI-92000 Windows compatible software.

Ideal:

• Pharmaceutical
• Advanced research
• Vaccine development
• Environmental laboratories

Supplied:

• HI-76312 conductivity probe
• HI-76404N electrode holder
• 12VDC power adapter
• Instruction manual

Product Details:

The HI2300 Autoranging Bench Meter measures EC, TDS, salinity and temperature. In EC and TDS ranges (up to 500 mS/cm and 400 g/L respectively) the instrument automatically chooses the best scale to maintain the highest accuracy. 

EC calibration is a one-point procedure. Selectable calibration points are 0.00 µS/cm, 84.0 µS/cm, 1413 µS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, and 111.8 mS/cm selected according with the expected measurement range. Salinity calibration is a one-point procedure at 100.0% NaCl. Use HI7037 calibration solution as a 100% NaCl standard solution. This instrument utilizes a four ring potentiometric probe with platinum sensors to o"er versatility over typical amperometric designs. By utilizing the four ring-method, it is possible to measure very low or high conductivity levels without changing probes.

Product Details:

We offer a wide range of HI98703 Turbidity Meter. This instrument incorporates complete GLP (Good Laboratory Practice) functions that allow traceability of the calibration conditions. The last calibration points, time and date can be checked at the touch of a button.

The instrument has an EPA compliance reading mode which rounds readings to meet EPA reporting requirements. Users will appreciate the accuracy and sensitivity of this instrument, particularly at very low turbidity levels.

Product Details:

The HI88703 Precision Turbidity Benchtop Meter is specially designed for water quality measurements, providing reliable and accurate readings on low turbidity ranges. This instrument has an EPA compliance reading mode which rounds the reading to meet EPA reporting requirements. Alternative EBC and Nephelos measuring units are available. Depending on the measured sample and needed accuracy, normal, continuous or signal averaging measurement can be selected. A two, three, four or 've-point calibration could be performed by using the supplied standards. When user-prepared standards are used, calibration points can be modifed.

Product Details:

HI 98303 EC and TDS Tester are rugged and reliable pocket-sized testers that offer quick and accurate readings of conductivity or TDS. The DiST family of testers is widely used for monitoring EC/TDS in drinking water, water conditioning, reverse osmosis, cooling towers, wastewater, laboratories, agriculture, aquaculture and aquariums, hydroponics and the printing industry. These testers feature an amperometric graphite electrode that provides better repeatability in measurements since they do not oxidize. An amperometric measurement of EC/TDS is based on Ohm’s Law, I = V/R where R depends on the distance between two pins and their surface. Oxidation changes both the distance and surface which will affect accuracy. The DiST’s non-oxidizing graphite pins are able to provide an optimal surface for accurate, dependable results.

Product Details:

Onset’s MX1101 Hobo Temperature Relative Humidity Data Logger to mobile devices via Bluetooth Low Energy (BLE) technology. The self-contained wireless data logger, which works with Onset’s free HOBOmobile app for logger setup and data management, enables you to access data anytime from mobile device for iOS or Android over a 100-foot range, and it requires no dedicated equipment beyond a mobile device for configuring the logger or reading out data. Using Onset’s free HOBOmobile app, you can view data in graphs, check the operational status of loggers, configure alarm notifications, and share data files. Remotely access your data in Onset’s cloud-based HOBOlink software with the new MX Gateway.

Highlighted Features:

• Wireless communication via Bluetooth Low Energy (BLE) technology
• Easy to deploy and offload using free HOBOmobile App
• Visual and audible high & low alarm thresholds
• Stores 84,000 measurements
• Accuracy: +/- 0.2C and +/- 2%RH
• Find me/pager feature
• Patented connectivity technology

Product Details:

With rich industrial experience we are involved in offering an extensive range of AL7010 Digital  Altimeter.

Product Details:

The 320 Grams Haga Altimeter for measuring tree heights, developed in 1950 by our company's founder Hans Haga, has been an essential tool in the international forestry and timber industry from back then to this day.

Combining precise functionality and comfortable handling with a long-life cycle, the altimeter became an unique product classic.

The indicator and scale systems are integrated into a rugged light metal casing and protected against outside influences. The pistol-shaped casing makes usage easy which is important for the accuracy of ongoing measurings.

The height determination is based on the known manner of measuring the angle between the altimeter's position and the top of the tree. The distance to an object can be measured comfortably and quickly and can even be improved with a rangefinder tape. Furthermore, the device is designed to support an optical rangefinder.

Auxiliary Equipment:

• Rangefinder with base band
• Rugged leather case including carrying strap

Product Details:

HI935005 K-Type Thermocouple Thermometer:

Maintenance and awareness are the first lines of defence in the battle against legionella. Supporting operators in this battle, the Hanna HI-935005 delivers highly accurate temperature measurements across a wide range using a K-type thermocouple probe. Display showing minimum and maximum temperature values taken during the measuring session helps with comprehensive record taking. Used regularly in applications where warm or hot water is converted into droplet or steam formation, the high accuracy HI-935005 can help to prevent the risk of Legionella by ensuring that temperatures are high enough in the water system to destroy the bacteria.

Ideal for:

• Hospitals
• Schools and colleges
• Residential and care homes
• Civic centres and leisure centres
• Swimming pools and aquariums
• Cooling towers
• Breweries

Product uses:

• Used to test pipe surface or water temperatures, the HI 935005 is well-placed to head off Legionella concerns for a wide variety of industrial and leisure industries.
• Air and water handling systems
• Pipe surface temperatures
• Water temperature from sentinel taps
• Beer mash tanks

Key Features:

• Water resistant casing
• Large LCD display gives clear readings for current temperature plus min and max temp values since startup
• Rubberised buttons are clearly marked for ease of use
• Easy shift between °C and °F
• HOLD to freeze readings on display and give more time to record data
• CLEAR button restarts evaluation of high and low values
• Equipped with Battery Error Prevention System to alert user if low battery is likely to adversely affect readings

Supplied with

• Batteries
• Instructions

Spare Probes & K-type thermocouple penetration probes:

• LPK1 Liquid probe with 1m cable
• SCK1 Surface probe with 1m cable (4.7mm Dia)
• SCK2 Surface probe with 1m cable (3.2mm Dia)
• SCK3 Surface and liquid probe with 1m cable
• Thermocouple penetration probes: HI-766TR1, HI-766TR2, HI-766TR3, HI-766TR4

Fact:

• Proactive management of water systems provides best protection against the spread of legionella bacteria.
• Legionella bacteria is spread by water droplet contamination. It is therefore virtually impossible to guarantee that the bacteria will not exist in a water system. But by adopting a rigorous, proactive approach with routine controls, the risk of an outbreak can be minimised

Product Details:

We are engaged in providing a range of COD Photometers Turbidity Meter to our valuable clients.

Product Details:

We offer a wide range of HI 98100 Checker Plus PH Meter. This has been designed with many advanced features while maintaining the look and feel of the original Checker. The Checker Plus now offers automatic calibration to one or two points, automatic buffer recognition, calibrated buffer tags, stability indicator, low battery indicator, and selectable automatic shut off. The Checker plus still maintains the iconic pentagon design with a probe that measures 103 mm in length and tapered to a 8 mm diameter making it ideal for test tubes and vials. Features at-a-glance:

Product Details:

We offer a wide range of Research Multiparameter Grade Meter. This is a research grade, benchtop instrument that feature 8 measurement ranges: pH, ORP (Oxidation Reduction Potential), ISE, conductivity, resistivity, TDS, salinity and temperature. This instrument incorporates dual channels with a separate temperature input and support the external reference electrodes required by half cell pH and ISE sensors.

The user interface is customizable and capable of displaying two channels at the same time, showing the measurements in various modes: basic measurement with or without GLP information, graph or logging data.

Product Details:

Hanna Edge PH Meter, For Laboratory, 250 G

Product Details:

The Cambium Networks Point-to-Multipoint PMP 450 Access Point can provide more than 90 Mbps throughput and will be interoperable with PMP 430 and PMP 100 Series Subscriber Modules (SM). Service providers with an installed base of PMP 100 subscribers can migrate to new high-throughput PMP 450 modules to enhance overall capacity; allowing more users and/or higher rate plans. Utilizing 2x2 MIMO-OFDM technology, new deployments can take advantage of Cambium Networks proprietary feature set, while achieving data rates higher than 90 Mbps. From the available synchronization options to its diverse feature set, the PMP 450 provides flexible deployment options that make it a good fit for high capacity, high reliability networks. Cambium Networks provides exceptional wireless broadband connectivity solutions. With more than 3 million modules deployed in thousands of networks around the world, Cambium solutions are proven to provide cost effective, reliable data, voice and video connectivity.